Reference:
Booster Set
Max flow : 960 m³/h
Max. height : 24 bar
Ranges
Description
Close-coupled multistage submersible pumps. The motor is protected by a double seal system with an oil chamber ensuring lasting reliability. Motor cooling is ensured by the pumping liquid. The AISI 304 stainless steel body and impellers guarantee superior performance and maximum operational efficiency. It can also be installed in a horizontal position.
Use
- Water supply from reservoirs, 6 inch wells, traditional wells, lakes etc.
- Automatic systems for the garden.
- Surface irrigation systems.
- Increased pressure in general inside the tank or well, to avoid suction problems and noise.
- Rainwater collection system.
Alimentation
220/240 V ~1 – 380/400 V ~3
Fréquence
50 Hz
Puissance
0.55 ÷ 1.5kW
Pôles
2
Refoulement vertical
RP 1 1/4″ ou G 1 1/4″
Refoulement horizontal
–
Température ambiante max.
40°C
Débit max.
11m3/h
Hauteur d’élévation max.
80m
Operation: Submerged
Max temperature pumped liquid: 40°C
Max temperature operating temperature: 40°C
Max time operating time with Q=0: 5s
pH of the treated liquid: 6÷14
Viscosity of the treated liquid: 1mm²/s
Maximum immersion depth: 20m
Density of the treated liquid: 998.3 Kg/m³
Content max. of solids: 2mm
Pump shaft: AISI 431 stainless steel
Motor jacket: AISI 304 stainless steel
Chamber: AISI 304 stainless steel
Bearing race (fixed): Silicon carbide
Bearing race (rotating): Silicon carbide
Impeller: AISI 304 stainless steel
Neck ring: PTFE
Suction strainer: AISI 304 stainless steel
Mechanical seal: Carbon / Ceramic / NBR
Mechanical seal: Carbon / SIC / NBR
Lower bearing support: AISI 304 stainless steel
Upper bearing support: AISI 304 stainless steel
Outer sleeve: AISI 304 stainless steel