As part of a desire to renew the offer, the Gray series offers the customer efficient and reliable products, with a view to rationalizing the range. The Gray project is based on a total redesign of the hydraulics and motors, in a triple objective: to guarantee high performance, low energy consumption and exceptional versatility. Result: better clarity of choice for the end user and better industrialization efficiency, resulting in increased reliability and reduced costs, at the customer benefit.

• Recycling of industrial and process water
• Lifting for civil engineering
• Drainage and lifting of water from the first rain basins

Operation: Submerged

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] / 15 [>10kW]

Solid passage max. : 110mm

Fluid: Clear / charged water mm

Operation: Submerged

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] / 15 [>10kW]

Solid passage max. : 110mm

Fluid: Clear / charged water mm

As part of a desire to renew the offer, the Gray series offers the customer efficient and reliable products, with a view to rationalizing the range. The Gray project is based on a total redesign of the hydraulics and motors, in a triple objective: to guarantee high performance, low energy consumption and exceptional versatility. Result: better clarity of choice for the end user and better industrialization efficiency, resulting in increased reliability and reduced costs, at the customer benefit.

• Removal of liquids containing filamentous and fibrous bodies
• Professional and industrial applications
• Animal farms

Operation: Submerged

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] / 15 [>10kW]

Solid passage max. :-

Fluid: Clear water mm

Motor casing: Cast iron GJL-250

Wheel: Cast Iron GJL-250

Mechanical seals: Two in silicon carbide (2SiC)

Screws: Stainless steel – Class A2-70

Standard seals: NBR

Drive shaft: AISI 431 stainless steel

Crusher knife: Chrome steel (only GRG)

Paint: Highly corrosion resistant two-component epoxy

As part of a desire to renew the offer, the Gray series offers the customer efficient and reliable products, with a view to rationalizing the range. The Gray project is based on a total redesign of the hydraulics and motors, in a triple objective: to guarantee high performance, low energy consumption and exceptional versatility. Result: better clarity of choice for the end user and better industrialization efficiency, resulting in increased reliability and reduced costs, at the customer benefit.

• Industrial applications and car washes
• Clear waters in fountains and water games
• Irrigation and fish farming

Operation: Submerged

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] / 15 [>10kW]

Solid passage max. : 10mm

Fluid: Clear water

Motor casing: Cast iron GJL-250

Wheel: Cast Iron GJL-250

Mechanical seals: Two in silicon carbide (2SiC)

Screws: Stainless steel – Class A2-70

Standard seals: NBR

Drive shaft: AISI 431 stainless steel

Crusher knife: Chrome steel (only GRG)

Paint: Highly corrosion resistant two-component epoxy

Designed for professional and intensive use, UNIQA electric pumps are used in civil and industrial purifiers, for the lifting of sewage and for the conveyance of waste water with solid bodies. The motors are developed to reach class Energy Premium (IE3), in accordance with standard EN 60034-30. They guarantee high efficiency and low energy consumption. The hydraulics are diversified to adapt perfectly to any type of application.

• Scavenged biological fluids and unfiltered sewage
• Ideal for civil pumping stations, lifting waste water in livestock and industries

Operation: Submerged

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [0 ÷ 10 kW] 15 [10 ÷ 160 kW] 10 [≥ 160 kW]

Solid passage max. : 125mm

Fluid: Charged / waste water

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 420 stainless steel

Cutter blade: Chrome steel (only ZUG GR)

Paint: Highly corrosion resistant two-component epoxy

Designed for professional and intensive use, UNIQA electric pumps are used in civil and industrial purifiers, for the lifting of sewage and for the conveyance of waste water with solid bodies. The motors are developed to reach class Energy Premium (IE3), in accordance with standard EN 60034-30. They guarantee high efficiency and low energy consumption. The hydraulics are diversified to adapt perfectly to any type of application.

• Waters with suspended solids
• Ideal for sewers, drains and first rain pits

Operation: Sanitation

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [0 ÷ 10 kW] 15 [10 ÷ 160 kW] 10 [≥ 160 kW]

Solid passage max. : 220 x 110mm

Fluid: Charged water

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 420 stainless steel

Cutter blade: Chrome steel (only ZUG GR)

Paint: Highly corrosion resistant two-component epoxy

Designed for professional and intensive use, UNIQA electric pumps are used in civil and industrial purifiers, for the lifting of sewage and for the conveyance of waste water with solid bodies. The motors are developed to reach class Energy Premium (IE3), in accordance with standard EN 60034-30. They guarantee high efficiency and low energy consumption. The hydraulics are diversified to adapt perfectly to any type of application.

• Clear water, rainwater and infiltration water
• Applications in agriculture, irrigation and fish farming

Operation: Sanitation

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [0 ÷ 10 kW] 15 [10 ÷ 160 kW] 10 [≥ 160 kW]

Solid passage max. : 10mm

Fluid: Clear water / lightly charged

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 420 stainless steel

Cutter blade: Chrome steel (only ZUG GR)

Paint: Highly corrosion resistant two-component epoxy

Designed for professional and intensive use, UNIQA electric pumps are used in civil and industrial purifiers, for the lifting of sewage and for the conveyance of waste water with solid bodies. The motors are developed to reach class Energy Premium (IE3), in accordance with standard EN 60034-30. They guarantee high efficiency and low energy consumption. The hydraulics are diversified to adapt perfectly to any type of application.

• Water loaded with filamentous and fibrous bodies
• Ideal for professional and intensive applications

Operation: Sanitation

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [0 ÷ 10 kW] 15 [10 ÷ 160 kW] 10 [≥ 160 kW]

Solid passage max. : 10mm

Fluid: Charged water mm

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 420 stainless steel

Cutter blade: Chrome steel (only ZUG GR)

Paint: Highly corrosion resistant two-component epoxy

Designed for professional and intensive use, UNIQA electric pumps are used in civil and industrial purifiers, for the lifting of sewage and for the conveyance of waste water with solid bodies. The motors are developed to reach class Energy Premium (IE3), in accordance with standard EN 60034-30. They guarantee high efficiency and low energy consumption. The hydraulics are diversified to adapt perfectly to any type of application.

• Water loaded with filamentous and fibrous bodies
• Ideal for professional and intensive applications

Operation: Sanitation

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] / 15 [>10kW]

Solid passage max. : 10mm

Fluid: Clear water

Motor casing: Cast iron EN-GJL-250

Impeller: Cast iron EN-GJL-250

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 420 stainless steel

Cutter blade: Chrome steel (only ZUG GR)

Paint: Highly corrosion resistant two-component epoxy

Pegasus has extended its range of UNIQA pumps by developing high-efficiency motors as well as Chopper hydraulics specially designed to pump very heavy water, capable of cutting and rejecting any solid body in the wastewater thanks to an efficient Chopper system.

• Heavy duty applications on civil wastewater treatment plants
• Sewage pumping stations with solids
• Sewage lifting
• Breeding in agricultural enterprise and zootechnical breeding
• Meat production process Fishing and canning industry
• Lifting in the cellulose and paper production line
• Recirculation of water in the textile and leather industry
• Pumping of wastewater in industrial chains in general

Operation: Sanitation

Max temperature pumped liquid: 40°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 15s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] – 15 [≥ 10kW]

Solid passage max. ::10mm

Fluid: Charged water

Motor casing: Cast iron EN-GJL-250

Wheel: Hard Cast Iron

Screws: Stainless steel – Class A2-70

Standard seals: Rubber – NBR

Drive shaft: AISI 431 stainless steel

Cutting system: Stainless steel – AISI 440C

Paint: Two-component epoxy with high corrosion resistance

The Pegasus S-WP pump: With the range of submersible pumps from the small S-WP1 to the large S-WP5, we cover the needs of light industrial effluents to heavy wastewater treatment works in cities and industries. The flow varies from 68m³/h to 4000 m³/h, and we have connections from DN50 to DN600.S-WP pumps can be used in many different applications by adjusting the motor size and impeller type, the solution can easily be customized to meet your requirements.

• Municipal raw wastewater applications characterized by high solids and/or fibrous media.

Operation: Sanitation

Max temperature pumped liquid: 45°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 20s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

start/hour max. : 20 [<10kW] – 15 [≥ 10kW]

Solid passage max. : 130mm

Fluid: Charged / waste water

Motor housing: Gray cast iron

Pump body: Gray cast iron

Shaft: Stainless steel (AISI 431)

Impeller: Ductile iron / stainless steel (AISI 316)

Wear ring: Steel (S235)

Lifting handle: Stainless steel (AISI 304)

Bolts / Nuts: Stainless Steel (A2)

Type PH submersible pumps are used to pump clean and dirty water, municipal and industrial, as well as other liquids, depending on the corrosion resistance of the materials from which the pump is made. They are a highly unified family of submersible and dry-installed pumps. There are different versions of these pumps, depending on the characteristics of the pumped liquids and the type and size of impurities pumped. In particular, they are applied in the pumping of sewage, including sewage with solids and the content of long fibers, as well as liquids containing air and gases. They work very well in pumping raw sludge containing active sediments and putrid sludge.

• Municipal raw wastewater applications characterized by high solids and/or fibrous media.

Operation: Sanitation

Max temperature pumped liquid: 45°C

Maximum immersion depth: 20m

Max time operating time with Q=0: 20s

Density of the treated liquid: 1100 kg/m³

Viscosity of the treated liquid: 1mm²/s

Treated liquid pH: 6 ÷ 14

Max start/hour: 20 [<10 kW] – 15 [≥ 10 kW]

Solid passage max. : 130mm

Fluid: Charged / waste water

Motor housing: Gray cast iron

Pump body: Gray cast iron

Shaft: Stainless steel (AISI 431)

Impeller: Gray cast iron / 32% chrome cast iron / 316 stainless steel

Wear ring: Steel (S235)

Lifting handle: Stainless steel (AISI 304)

Bolts / Nuts: Stainless Steel (A2)