Close-coupled multistage submersible pumps. The motor is protected by a double seal system with an oil chamber ensuring lasting reliability. Motor cooling is provided by the pumping liquid. AISI 304 stainless steel body and impellers guarantee superior performance and maximum operational efficiency. It can also be installed in a horizontal position.

• Water supply from reservoirs, 6 inch wells, traditional wells, lakes etc.
• Automatic systems for the garden.
• Surface irrigation systems.
• Increased pressure in general inside the tank or well, to avoid suction problems and noise. Rainwater collection system.

Operation: Submerged

Max temperature pumped liquid: 40°C

Max temperature operating temperature: 40°C

Max time operating time with Q=0: 5s

pH of the treated liquid: 6÷14

Viscosity of the treated liquid: 1mm²/s

Maximum immersion depth: 20m

Density of the treated liquid: 998.3 Kg/m³

Content max. of solids: 2mm

Pump shaft: AISI 431 stainless steel

Motor jacket: AISI 304 stainless steel

Chamber: AISI 304 stainless steel

Bearing race (fixed): Silicon carbide

Bearing race (rotating): Silicon carbide

Impeller: AISI 304 stainless steel

Neck ring: PTFE

Suction strainer: AISI 304 stainless steel

Mechanical seal: Carbon / Ceramic / NBR

Mechanical seal: Carbon / SIC / NBR

Lower Bearing Support: AISI 304 stainless steel

Upper bearing support: AISI 304 stainless steel

Outer sleeve: AISI 304 stainless steel